Anthropic-Cybersecurity-Skills/skills/detecting-secure-boot-bypass/SKILL.md

name, description, domain, subdomain, tags, version, author, license, nist_csf, mitre_attack

name	description	domain	subdomain	tags	version	author	license	nist_csf	mitre_attack
detecting-secure-boot-bypass	Detect bootkits such as BlackLotus and Bootkitty and Secure Boot bypass via DBX and binary checks.	cybersecurity	hardware-firmware-security	hardware-firmware-security secure-boot uefi bootkit dbx-revocation blacklotus chipsec firmware-integrity	1.0	mahipal	Apache-2.0	DE.CM-01	T1542.003

Detecting Secure Boot Bypass

Legal Notice: Firmware and Secure Boot assessment must only be performed on systems you own or are explicitly authorized to test. CHIPSEC's write/modify modes and EFI variable manipulation can brick hardware. Run destructive checks only in a lab. This skill is for defensive verification and authorized assessment.

Overview

UEFI Secure Boot is the firmware-enforced trust chain that only permits boot components signed by keys in the platform's allow-list (db) and not present in the revocation list (dbx). Bootkits defeat this layer to gain pre-OS, persistent, kernel-level control that survives OS reinstalls and disk wipes. BlackLotus (2023) was the first publicly observed UEFI bootkit to bypass Secure Boot on fully patched Windows 11, abusing CVE-2022-21894 ("baton drop") in a vulnerable, signed Windows boot manager to neutralize Secure Boot and disable BitLocker, HVCI, and Defender. Bootkitty (2024) was the first PoC UEFI bootkit targeting Linux. Microsoft's CVE-2023-24932 addressed a related Secure Boot bypass that required a phased dbx (revocation) rollout because revoking the vulnerable boot managers can render systems unbootable if applied carelessly.

The core defensive insight is that patching the OS is not sufficient — the platform remains exploitable until the vulnerable, signed binaries are revoked in dbx. Detection therefore combines: (1) confirming Secure Boot is actually enabled, (2) verifying dbx is current and contains the relevant revocations, (3) checking the integrity and protection of Secure Boot EFI variables with CHIPSEC, (4) hashing on-disk EFI boot binaries and comparing them against the revocation list and known-bad sets, and (5) inspecting firmware/ESP for bootkit artifacts. This skill provides a cross-platform (Linux + Windows) workflow using mokutil, efi-readvar/dbxtool, chipsec, sbverify/pesign, and Windows Confirm-SecureBootUEFI / Get-SecureBootUEFI.

When to Use

• Verifying that an estate's Secure Boot configuration is enabled, locked, and current after the CVE-2023-24932 / BlackLotus advisories.
• Hunting for UEFI bootkit indicators on a suspected-compromised endpoint.
• Validating that dbx revocations (e.g., vulnerable Windows boot managers, Kaspersky/other vulnerable bootloaders) have actually applied across the fleet.
• Auditing firmware integrity and Secure Boot variable protections during a hardware security assessment.
• Building a recurring measured/baseline check for boot-chain tampering.

Prerequisites

• Root/administrator on the target (firmware reads require privilege).
• Linux tooling:

  sudo apt install mokutil efitools sbsigntool dbxtool      # Debian/Ubuntu
  sudo dnf install mokutil efitools sbsigntools dbxtool     # Fedora/RHEL
  

• CHIPSEC (run from a live USB or controlled host; loads a kernel driver):

  pip install chipsec        # or build from https://github.com/chipsec/chipsec
  

• Windows tooling: PowerShell (built-in Confirm-SecureBootUEFI, Get-SecureBootUEFI), and optionally the UEFI dbx update package from Microsoft.
• The current dbxupdate files from https://uefi.org/revocationlistfile to compare against.

Objectives

• Confirm Secure Boot is enabled and in user (not setup) mode.
• Enumerate db, dbx, KEK, and PK contents and assess freshness of dbx.
• Verify the relevant CVE revocations are present in dbx.
• Validate Secure Boot EFI variables are authenticated and protected (CHIPSEC).
• Hash ESP boot binaries and check them against dbx and known-bad hash sets.
• Identify bootkit artifacts and report exploitable gaps with remediation.

MITRE ATT&CK Mapping

Technique ID	Technique Name	Relevance
T1542.003	Pre-OS Boot: Bootkit	Core technique — bootkit subverts the boot chain below the OS.
T1542	Pre-OS Boot	Parent technique covering firmware/boot-component tampering.
T1542.001	Pre-OS Boot: System Firmware	Adjacent: firmware modification used to persist or weaken Secure Boot.
T1014	Rootkit	Bootkits provide rootkit-level concealment and persistence.
T1562.001	Impair Defenses: Disable or Modify Tools	BlackLotus disables BitLocker/HVCI/Defender after bypassing Secure Boot.

Workflow

1. Confirm Secure Boot state (Linux)

A disabled or setup-mode platform offers no protection.

mokutil --sb-state                       # "SecureBoot enabled" expected
bootctl status | grep -i "secure boot"   # systemd-boot view
# 6 = enabled+user mode on the EFI SecureBoot/SetupMode vars:
od -An -t u1 /sys/firmware/efi/efivars/SecureBoot-8be4df61-93ca-11d2-aa0d-00e098032b8c

2. Confirm Secure Boot state (Windows)

Confirm-SecureBootUEFI        # $true if enabled
# Inspect the raw dbx variable from Windows:
[System.BitConverter]::ToString((Get-SecureBootUEFI dbx).bytes) | Out-File dbx.hex

3. Enumerate the Secure Boot databases

List db (allowed), dbx (revoked), KEK, and PK.

efi-readvar                      # dumps PK, KEK, db, dbx
efi-readvar -v dbx -o dbx.esl    # export dbx to a file for offline analysis
mokutil --list-enrolled          # MOK (shim) enrolled keys
mokutil --db                     # platform db entries via shim

4. Assess dbx freshness and applied revocations

Compare on-system dbx to the current official UEFI revocation list.

dbxtool --list                                   # current dbx entries + count
# Download latest dbxupdate from uefi.org/revocationlistfile, then:
dbxtool --dbx ./DBXUpdate.bin --apply --dry-run  # show what WOULD be added (no write)

A low dbx entry count or absence of recent revocations indicates the platform is behind and likely still vulnerable to known bypasses.

5. Check Secure Boot variable protection with CHIPSEC

Verify the SB key variables are authenticated and not freely writable.

# Verify Secure Boot is enabled and the SB variables are properly protected:
sudo chipsec_main -m common.secureboot.variables

# Check S3 resume boot-script protections (an SMM/firmware bypass vector):
sudo chipsec_main -m common.uefi.s3bootscript

# Dump SPI flash for offline firmware diffing:
sudo chipsec_util spi dump rom.bin

6. Hash ESP boot binaries and check signatures

Verify bootloaders are signed and not present in dbx.

# Locate and hash EFI boot binaries
find /boot/efi -iname '*.efi' -exec sha256sum {} \;
# Validate a binary's signature against the platform db
sbverify --list /boot/efi/EFI/BOOT/bootx64.efi
sbverify --cert /etc/secureboot/db.crt /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
# pesign equivalent on RHEL-family:
pesign -S -i /boot/efi/EFI/BOOT/bootx64.efi

7. Cross-check against known-bad bootkit hashes

Compare collected hashes to revocation/known-bad sets (e.g., LoFP / vendor advisories).

# Example: confirm a binary's SHA-256 is NOT one of the revoked CVE-2022-21894 boot managers
sha256sum /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
# Compare against the hash list extracted from the latest dbxupdate / advisory.

8. Inspect for bootkit artifacts

Look for unauthorized ESP modifications and self-deployment markers.

# Unexpected files / recently modified binaries on the ESP
ls -laR /boot/efi/EFI/
find /boot/efi -newermt "-30 days" -iname '*.efi'
# On Windows, examine the EFI partition for rogue \EFI\Microsoft\Boot entries.

9. Validate measured-boot evidence (optional pivot)

If a TPM is present, current PCR[7] reflects Secure Boot policy; deviations corroborate tampering.

tpm2_pcrread sha256:7        # Secure Boot policy PCR

10. Run the bundled assessment helper

agent.py collects SB state, dbx counts, ESP binary hashes, and CHIPSEC results into one report.

sudo python scripts/agent.py --check-chipsec --output secureboot_report.json

Tools and Resources

Tool	Purpose	Source
mokutil	Secure Boot state and enrolled keys (Linux)	https://github.com/lcp/mokutil
efitools (efi-readvar)	Dump PK/KEK/db/dbx	https://git.kernel.org/pub/scm/linux/kernel/git/jejb/efitools.git
dbxtool	Inspect and apply dbx updates	https://github.com/rhboot/dbxtool
CHIPSEC	Firmware / Secure Boot variable assessment	https://github.com/chipsec/chipsec
sbsigntool / pesign	EFI binary signature verification	https://github.com/jejb/sbsigntools
UEFI Revocation List	Official dbx update files	https://uefi.org/revocationlistfile
Microsoft KB CVE-2023-24932	Secure Boot bypass guidance	https://support.microsoft.com/topic/kb5025885
ESET BlackLotus analysis	Bootkit technical writeup	https://www.welivesecurity.com/2023/03/01/blacklotus-uefi-bootkit-myth-confirmed/

Validation Criteria

• Secure Boot confirmed enabled and in user mode on the target.
• PK/KEK/db/dbx enumerated and exported for analysis.
• dbx compared against the current official UEFI revocation list.
• CVE-2022-21894 / CVE-2023-24932 revocations confirmed present (or gap flagged).
• CHIPSEC secureboot.variables and s3bootscript modules run.
• ESP boot binaries hashed and signature-verified.
• Hashes cross-checked against known-bad / revoked sets.
• ESP inspected for unauthorized or recently modified binaries.
• Findings documented with remediation (dbx update / firmware update) per host.